There are many kinds of bridge, including slot type and ladder type. These bridges are generally used on corridors of various buildings and pipe supports. Although the structure is very simple, they are smooth, clean and beautiful with stainless steel. In addition, their functions cannot be underestimated. The specific impact of various supports is different.

　　1.槽橋:

　　1. slot bridge:

　　槽形玻璃鋼橋是一種全封閉式電纜橋架，更適用于敷設計算機電纜、通信電纜、熱電偶電纜及其它高敏感系統的控制電纜等。對控制電纜的屏蔽干擾和電纜在重腐蝕環境中的保護效果良好。玻璃鋼橋蓋與水箱配套。

　　The channel glass fiber reinforced plastic bridge is a kind of fully enclosed cable bridge, which is most suitable for laying computer cables, communication cables, thermocouple cables and other high sensitive system control cables. The shielding interference of the control cable and the protection effect of the cable in the heavy corrosion environment are good. The fiberglass Bridge cover is matched with the water tank.

　　槽式橋架的橋架一般屬于封閉的類型,不開洞,所以在散熱較差的方面,和槽底梯形橋架是有很多的腰形孔,散熱性能能夠更好的相對。

　　The tray of trough type bridge is generally closed type, without holes, so in terms of poor heat dissipation, there are many waist shaped holes with trapezoidal tray at the bottom of the trough, so the heat dissipation performance can be better.

　　2.梯橋:

　　2. ladder bridge:

　　梯式橋梁是企業根據國內外有關資料和同類產品改進的一種新型橋梁，它具有重量輕、成本低、造型獨特、安裝方便、散熱、透氣性好等優點。適用于大直徑電纜的敷設，特別適用于高低壓電力電纜的敷設。梯式橋設有防護罩，訂貨時可指示，所有配件均為托盤式和槽式橋通用。

　　Ladder bridge is a new type of bridge which is improved by enterprises according to the domestic and foreign materials and similar products. It has the advantages of light weight, low cost, unique shape, convenient installation, heat dissipation, good air permeability and so on. It is suitable for laying large diameter cables, especially for laying high and low voltage power cables. The ladder type bridge is equipped with protective cover, which can be indicated when ordering. All accessories are common for tray type and slot type bridges.

　　云梯橋架有圓弧彎曲孔型:彎曲孔型、三通、三通等結構均為優美的圓弧，內彎曲半徑為r200-900mm。電纜彎曲是一種自然的過渡，避免了電纜彎曲引起的斷裂，提高了電纜橋架的強度。

　　The ladder bridge has arc bending hole type: the bending hole type, tee, tee and other structures are all beautiful arc, and the inner bending radius is r200-900mm. Cable bending is a natural transition, which avoids the fracture caused by cable bending and improves the strength of cable bridge.

　　云梯橋產品重量相對較輕，在施工過程中安裝更方便快捷，運輸裝卸過程也更快。因此，在施工中，如果質量相對較輕，可以使施工單位更加方便。其次，對于施工來說，安裝方便也是必要的;再次，也要保證產品的造型好，這樣才能保證施工效果的好。

　　The product weight of the ladder bridge is relatively light, and it is more convenient and quick to install in the construction process, and the transportation and loading and unloading process is faster. Therefore, in the construction, if the quality is relatively light, it can make the construction unit more convenient. Secondly, for the construction, it is necessary to install conveniently; thirdly, it is also necessary to ensure the good shape of the product, so as to ensure the good construction effect.

　　以上是山東電纜橋架廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://yxsdz.cnThe above is the relevant content introduced by Shandong cable bridge manufacturer for you. To learn more, please visit the website: http://yxsdz.cn