防腐電纜橋架的使用規范有哪些?
1.電纜布置:在防腐電纜橋架上布置電纜時,應遵循電纜彎曲半徑的要求,避兔過度彎曲導致電纜損壞或過早老化。同時,要確保電纜在橋架內合理分布,避免堆積或過緊的情況。
1. Cable layout: When laying cables on anti-corrosion cable trays, the requirements for cable bending radius should be followed to avoid excessive bending that may cause cable damage or premature aging. At the same time, it is necessary to ensure that the cables are reasonably distributed within the cable tray to avoid stacking or excessive tightness.
2.承載能力:要了解防腐電纜橋架的承載能力限制。在承載過大的情況下,可能會(huì )導致橋架變形或損壞。因此,要根據實際需求合理規劃電纜的布局和數量。
2. Bearing capacity: It is necessary to understand the bearing capacity limitations of anti-corrosion cable trays. Under excessive load, it may cause deformation or damage to the bridge frame. Therefore, it is necessary to plan the layout and quantity of cables reasonably based on actual needs.
3.避免接觸腐蝕性物質:在使用過程中,要避免防腐電纜橋架接觸具有腐蝕性的物質,如酸、堿、鹽等化學物質,以防止對橋架造成腐蝕損傷。
3. Avoid contact with corrosive substances: During use, anti-corrosion cable trays should avoid contact with corrosive substances such as acids, alkalis, salts, etc. to prevent corrosion damage to the trays.
維護保養:
Maintenance:
1.定期檢查:定期對防腐電纜橋架進行檢查.包括連接部位、支撐結構、電纜等部分。如發現異常情況,如腐蝕、松動、破損等應及時進行處理。
1. Regular inspection: Regularly inspect anti-corrosion cable trays, including connection parts, support structures, cables, and other parts. If any abnormal situations are found, such as corrosion, looseness, damage, etc., they should be dealt with in a timely manner.
2.清潔保養:定期橋架上的灰塵、污垢和其他雜質,保持橋架的清潔和良好的散熱性能。同時,對連接部位進行潤滑維護,防止銹蝕和磨損。
2. Cleaning and maintenance: Regularly remove dust, dirt, and other impurities from the bridge to maintain its cleanliness and good heat dissipation performance. At the same time, lubrication and maintenance should be carried out on the connecting parts to prevent rust and wear.