When choosing the galvanizing method for cable trays, hot-dip galvanizing is considered a better choice. The following is a comparative explanation of hot galvanizing and cold galvanizing for Jinan cable trays:

冷鍍鋅電纜橋架介紹：

Introduction to Cold Galvanized Cable Tray:

冷鍍鋅也叫“電鍍鋅”，它是用冷鍍鋅工藝直接生產而成，冷鍍鋅工藝上的原理就是通過電極反應得到。冷鍍鋅的耐腐蝕性肯定是沒有其他材質的電纜橋架好，主要是因為它的鍍鋅量不夠，所以常用到室內干燥環境下安裝。

Cold galvanizing, also known as "electro galvanizing", is directly produced using the cold galvanizing process. The principle of the cold galvanizing process is to obtain it through electrode reactions. The corrosion resistance of cold galvanizing is definitely not as good as other materials of cable trays, mainly because its galvanizing amount is not enough, so it is often installed indoors in a dry environment.

熱鍍鋅電纜橋架介紹：

Introduction to hot-dip galvanized cable tray:

熱鍍鋅也稱為“熱浸鋅”，熱鍍鋅電纜橋架的工藝是將橋架除銹后放入600°左右高溫熔化的鋅液里，使電纜橋架的表面粘附一層厚的浸鋅層，由于標準規定，其鋅層厚度在5mm以下的薄鋼板不得小于65um，在厚鋼板上不得小于86um，可以很好的達到防腐蝕的目的。熱浸鍍鋅技術作為一種有效的金屬防腐方法，已廣泛應用于各種工業結構的金屬設備中，其耐腐蝕年限可達10年以上。

Hot dip galvanizing, also known as "hot dip galvanizing", is the process of removing rust from the cable tray and placing it in a high-temperature molten zinc solution at around 600 ° C, so that a thick zinc coating is adhered to the surface of the cable tray. According to national standards, the zinc coating thickness of thin steel plates below 5mm should not be less than 65um, and on thick steel plates should not be less than 86um, which can effectively achieve the goal of corrosion prevention. As an effective method of metal corrosion prevention, Hot-dip galvanization technology has been widely used in metal equipment of various industrial structures, and its corrosion resistance life can reach more than 10 years.

比較：

Comparison:

1.熱鍍鋅：熱鍍鋅是將鋼制材料浸入熔化的鋅中進行鍍鋅。這個過程創(chuàng )建了一個密實、均勻的鋅層，提供了優異的耐腐蝕性和耐久性。熱鍍鋅的鍍層厚度通常比冷鍍鋅更厚，因此更能保護鋼材。

1. Hot dip galvanizing: Hot dip galvanizing is the process of immersing steel materials into molten zinc for galvanizing. This process creates a dense and uniform zinc layer, providing excellent corrosion resistance and durability. The coating thickness of hot-dip galvanizing is usually thicker than that of cold galvanizing, thus providing better protection for steel.

2.冷鍍鋅：冷鍍鋅是就是利用電鍍鋅工藝制作，就是利用電解在制件表面形成均勻、致密、結合良好的金屬或合金沉積層的過程。冷鍍鋅的鋅層相對較薄，可能不如熱鍍鋅提供同樣的耐腐蝕性和耐久性。

2. Cold galvanizing: Cold galvanizing is the process of using the electroplating process to produce a uniform, dense, and well bonded metal or alloy deposit layer on the surface of the workpiece through electrolysis. The zinc layer of cold galvanizing is relatively thin and may not provide the same corrosion resistance and durability as hot galvanizing.

綜合考慮，熱鍍鋅通常被認為是更好的鍍鋅方式，特別是在暴露于惡劣環境條件下的電纜橋架應用中。熱鍍鋅能夠提供更長久的保護，抵抗腐蝕和磨損。

Overall, hot-dip galvanizing is generally considered a better method of galvanizing, especially in cable tray applications exposed to harsh environmental conditions. Hot dip galvanizing can provide longer lasting protection against corrosion and wear.

然而，具體選擇應根據應用需求、成本和可行性等因素進行評估。在選擇任何類型的鍍鋅方式時，確保符合相關行業標準和規范，做出正確的決策。更多相關事項就來我們網站http://yxsdz.cn咨詢！

However, the specific selection should be evaluated based on factors such as application requirements, cost, and feasibility. When selecting any type of galvanizing method, ensure compliance with relevant industry standards and specifications, and make the correct decision. For more related matters, come to our website http://yxsdz.cn consulting service