電纜橋架燈的安裝注意事項!
電纜橋架下方可以安裝照明燈具,山東電纜橋架公司安裝led燈具,但是在安裝的時候為了保證施工的性以及日后的使用情況我們在安裝的時候也要格外注意一些細節。小編在這里就給大家總結了一下具體注意事項,如下:
Lighting lamps can be installed under the cable bridge. Shandong cable bridge company recommends the installation of LED lamps, but in order to ensure the safety of construction and future use, we should pay special attention to some details when installing. Xiaobian here summarizes the specific points for attention, as follows:
1.燈具距離與燈具種類和燈具的照度有關,日光燈一般4米即可,地下室柱間距離一般為8米,4柱間4個等即可。
1. The distance between lamps and lanterns is related to the types of lamps and illumination of lamps. Fluorescent lamps are usually 4 meters long, basement columns are 8 meters long and 4 columns are equal.
2.燈具一般不裝在橋架上,應急燈一般布置在車道上方,距離可遠一點(6~12米),滿足照度要求即可。
2. Luminaires are generally not installed on the bridge. Emergency lights are generally arranged above the lane. The distance can be a little farther (6-12 meters) to meet the requirements of illumination.
3.大多采用空氣開關分區域控制,也可加裝智能控制模塊實現智能控制。
3. Most of them adopt air switch sub-area control, and intelligent control module can be added to realize intelligent control.
只有遵守以上的原則安裝電纜橋架燈,大家就可以的使用了,不知道大家看完有沒有明白呢?
Only by following the above principles and installing the cable bridge lamp, you can use it safely. I wonder if you understand it after reading it.
以上就是由山東電纜橋架公司的小編給大家整理提供的精彩內容了,想要了解更多詳情,歡迎大家收藏我們官網:http://yxsdz.cn
The above is the wonderful content provided to you by the small edition of Shandong Cable Bridge Company. For more details, you are welcome to collect our official website: http://yxsdz.cn.